Cylinder vacuum cleaner Troubleshooting Guide

Cylinder Vacuum Cleaners are a good helper for modern household cleaning, but occasionally there are some failures that affect the use experience. Don't worry, many common problems can be diagnosed and ruled out on their own. This article will introduce you to some of the common failures of cylinder vacuum cleaners and their solutions, so that you can easily restore the normal work of thevacuum cleaner.

First, the suction is weakened or disappeared
Possible causes:

The dust bag or box is full: this is the most common cause of reduced suction. The problem can be solved by emptying the dust bag or dust box in time.

Filter blockage: The filter is not cleaned for a long time, which will lead to airflow obstruction and affect suction. It is important to clean or replace the filter regularly.

Blocked straws or hoses: Check straws and hoses for foreign matter and clean them if necessary.

Suction plug: Hair, line and so on are easy to wrap around the suction head, resulting in reduced suction. Clean the suction head regularly to keep it unobstructed.

Second, abnormal noise
Possible causes:

Foreign matter into the vacuum cleaner: Check whether there is foreign matter inside the vacuum cleaner, such as coins, buttons, etc., and remove it in time.

Fan blade damage: Deformed or broken fan blades increase noise. Need to contact professional maintenance personnel to replace.

Bearing wear: Bearing wear can lead to abnormal noise during operation. It is recommended to contact the after-sales service center for maintenance.

3. Motor overheating
Possible causes:

Dust bag or dust box is full: empty the dust bag or dust box in time to avoid excessive motor load.

Filter blockage: Clean or replace the filter to ensure smooth airflow.

Plug of suction head: Clean the suction head to avoid overheating of the motor.

Continuous use time is too long: let the vacuum cleaner rest properly to avoid overheating damage to the motor.

Fourth, the power cord can not be recovered
Possible causes:

Power cable entanglement: Check that the power cables are not entangled and try to straighten them out manually.

Recovery device failure: If the power cord cannot be recovered, there may be a failure of the recovery device, and professional maintenance personnel need to be contacted.

V. Summary
The above are some common cylinder vacuum cleaner failures and troubleshooting methods. If you encounter more complex problems, it is recommended to refer to the product manual or contact professional maintenance personnel for handling. Regular maintenance and maintenance of your cylinder vacuum cleaner can effectively extend its service life, so that it always provides you with an efficient cleaning service.

Tips: Before performing any repair operations, be sure to unplug the vacuum cleaner to ensure safety.